Follow fire safety tips to avoid Christmas tree disasters

December 4, 2012

By Staff

NEW — 10 a.m. Dec. 4, 2012

The holiday season is a time for celebration, but fire hazards from Christmas trees and other decorations can dampen the festive spirit.

State fire officials remind residents to properly care for and decorate Christmas trees, and to practice fire safety in order to prevent yuletide emergencies.

If a household holiday display includes a natural tree, keep the tree adequately watered. Improper care and decoration of live or artificial Christmas trees can lead to catastrophic fires.

“It takes only seconds for a tree to ignite and the entire room to become engulfed in flames,” state Fire Marshal Charles Duffy said in a statement.

Duffy’s office shared precautionary tips Monday for residents to ensure a safe and happy holiday.

When selecting a Christmas tree, needles on fresh trees should be green and hard to pull back from the branches, and the needle should not break if the tree has been freshly cut. The trunk should feel sticky to the touch.

Old trees can be identified by bouncing the tree trunk on the ground. If many needles fall off, the tree has been cut too long, has probably dried out and is a fire hazard.

Do not put a natural tree up too early or leave it up for longer than two weeks. Keep the tree stand filled with water at all times.

Keep Christmas trees away from heat sources including fireplaces and heat vents. The heat will dry out the tree, causing it to be more easily ignited by heat, flame or sparks. Be careful not to drop or flick cigarette ashes near a tree.

Never put tree branches or needles in a fireplace or wood-burning stove. When the tree becomes dry, discard it promptly. The best way to dispose of a natural tree is by taking it to a recycling center or having it hauled away by a community pick-up service.

Inspect holiday lights each year for frayed wires, bare spots, gaps in the insulation, broken or cracked sockets, and excessive kinking or wear before putting them up. Use only lighting listed by UL or another approved testing laboratory.

Do not link more than three light strands into a single electrical outlet, unless the directions indicate it is safe. Connect strings of lights to an extension cord before plugging the cord into the outlet. Make sure to periodically check the wires; they should not feel warm to the touch.

All decorations should be nonflammable or flame-retardant, and artificial or metallic trees should also be flame-retardant.

Bookmark and Share
Other Stories of Interest: , ,

Comments

Got something to say?

Before you comment, please note:

  • These comments are moderated.
  • Comments should be relevant to the topic at hand and contribute to its discussion.
  • Personal attacks and/or excessive profanity will not be tolerated and such comments will not be approved.
  • This is not your personal chat room or forum, so please stay on topic.